Bar Marking 

BAR MARKING.jpg

The SOSSNER line of manual and pneumatic impact presses provides the versatility needed in your manufacturing operation.  Whether the need is marking, piercing, shearing, punching, forming, stamping or assembly, the SOSSNER impact press will be one machine for all your needs.  The unique impact springs design provides consistent pressure from piece to piece, even with variations of air pressure or operator input.

Innovative technology from Sossner has produced a bar marking machine that will outperform any comparable equipment available to industry.

 

The exclusive Sensor Control System is the brain of this machine. Starts and stops, even emergency stops, are all controlled automatically.

 

A more compact and efficient AC powered, DC motor drive delivers variable speeds without gear or torque changes. At both the beginning and the end of the bar, speed is increased/decreased slowly without reducing the force of the torque.

 

You can mark both top and bottom simultaneously if you desire. A heavier face for stability, easier drive and marking wheel changes complete the unit.

Manual Impact

Presses


Manual controlled bench type machines

The Perfect Press to replace that single use lever or toggle press.  Accepts 25mm, 36mm, or 60mm diameter tooling.  Perfect for assembly, pressing or crimping.

 

mb15.jpg
mb20.jpg
mb32.jpg

MB15
.5 tons (0-600 kg)
Height: 18 in (455 mm)
Weight: 21 lbs. (9.5 kg)
Table:  4x4 in (100x100 mm)
Throat: 10 3⁄4 in  (225 mm)

MB20
3.3 tons (0-3000 kg)
Height: 30 in (760 mm)
Weight: 73 lbs (33.5 kg)
Table: 63/8 x 63/8 in (160x160 mm)
Throat: 17 in. (430 mm)

MB32
7.1 tons (0-6500 kg)
Height: 35 in (910 mm)
Weight: 218 lbs (99 kg)
Table: 81/2 x 81/2 in (220x220 mm)
Throat: 173/4 in (450 mm)

Pneumatic Impact

Presses


Pneumatic controlled bench type machines
 
The pneumatic version of the mechanical press above.  Perfect for those repetitive jobs where operator fatigue is a factor.

mb19.jpg
mb21.jpg
mb35.jpg

MB21
3.75 tons (0-3500 kg)
Height: 24.8 in (630 mm)
Weight: 120 lbs (55 kg)
Table: 63/4 x 63/4 in (170x170 mm)
Throat: 101/4 in (430 mm)
Air Pressure Required: 60-90 PSI

MB35
8.5 tons (0-7500 kg)
Height: 33.5 in (850 mm)
Weight: 352 lbs (160 kg)
Table: 95⁄8x 9 5⁄8 in (245x245 mm)
Throat:  113/4 in (300 mm)
Air Pressure Required: 90-100 PSI

MB19
.75 tons (0-700 kg)
Height: 14.8 in (375 mm)
Weight: 35 lbs (16 kg)
Table: 41/2 x 41/2 in (110 x 110mm)
Throat: 65⁄8 in (170 mm)
Air Pressure Required: 40-50 PSI

Variable position mounting where compact size with full power capabilities are required.  (Show with optional angle supports.)

A true pneumatic press that provides the fine adjustment required for assembly and pressing with a large 125mm diameter tooling capacity.  The sensitive approach to automating the assembly line.

 

MB35VP
8.5 tons (0-7500 kg)
Length: 26.8 in (405mm)
Weight: 113 lbs (11.5 kg)
Air Pressure Required: 90-100 PSI

mb19vp.jpg
mb21vp.jpg
mb35vp.jpg

MB21VP
3.75 tons (0-3500 kg)
Length: 16 in (405mm)
Weight: 25 lbs (11.5 kg)
Air Pressure Required: 60-90 PSI

MB19VP
.5 tons (0-600 kg)
Length: 9 in (405mm)
Weight: 4.5 lbs (11.5 kg)
Air Pressure Required: 40-50 PSI

Numbering Heads

Sossner's precision engineered numbering heads are built with today's "space age" technology and alloy steels to ensure outstanding life at a lower total cost. Standard heads are stocked and all styles of custom heads are available upon request.

Head2.jpg

 

Numbering Heads for:


* Indent marking - Hot stamping - Embossing - Roll Marking and special jobs


* Character sizes: 1/32" to 3" numbers or letters in gothic, low stress, dot face, bar code, and other style characters.


* Wheels: 1 to 28 wheels per head with up to 90 characters per wheel.

Head.jpg

MFR Series
Offers versatility to both roll mark or stamp your product.  When equipped with the optional table cylinder, the MLFR Series provides the cross slide action of a roll marker and the press action of a pneumatic press.  

 

Steel Stamps

SOSSNER quality engineering marking tools are made with deep chisel-like characters to produce a clear, distinctive impression in your product.  Top quality alloy tool steels and our unique TRUE-SHARP® hardening process assure you superior stamp life with less down time.  

Features/Benefits
 

  • Accepts 1/8" to 8" diameter round or up to 6" flat parts...one unit for both press and roll marking applications
     

  • Open throat design accommodates extended flat or round parts...easy manual or automated parts feeding front to back
     

  • Fully pneumatic operation... quiet, smooth operation using linear bearings
     

  • Table mounted machine... bench model construction allows locating machine at part or operator level

  • Large 10"x12" marking table with 16 D & T holes for tooling... accepts standard off-the-shelf tooling
     

  • Dual direction marking on round parts... twice the marking speed of single direction units
     

  • Positive table lock... positive marking depth control